Accessibility
- Wheelchair accessible entrance
Reviews
Reviews are sorted by relevance, with the most helpful and insightful feedback listed first for easy reference.
One Stop Renovations
a week ago
Was recommended by The Auto Syndicate ., I had my PI heads done. They came out Excellent. Jeff the owner is very down-to-earth and transparent right to the point doesn t cut any corners gives excellent advice. If you wanna do business with them, go in person highly recommend.
Tony Smith
3 years ago
I stopped by today with a problem on a wire installation machine (not something they would typically work on). Jeff graciously came out and looked at my problem and gave me guidance on how to fix it. Thank you Jeff for you help. Tony - Mowbot of Orlando
Devon C (tanker)
4 years ago
Brought in a bad flywheel and after about an hour to hour and a half they brought it back to new! These guys are the real deal and would def recommend!
Kenyatta Samuels
a year ago
I recently got my 2J machined and partially assembled with them. They do not cut corners or try to sell you services that is not needed. Very knowledgeable and transparent. I would highly recommend them. I will be sending another 2J there soon.Service: Motor buildingService: Motor building
Chris Villacreses
a year ago
Brought two different flywheels here on two separate occasions to be resurfaced, and they did a magnificent job. Both of them came back with a mirror finish, and after installed on the vehicles they performed as intended. Happy to continue giving these guys my business. Best way to communicate with the shop is via email.
TheSquirr3ly
2 years ago
Great quality work, and very knowledgeable staff
Samuel Melecio
11 months ago
Greate place. Very profetional and good mwchine shop that doble check his work before handing it out.And no crazy or unrealistic wait times. I go all the way from Ocala just to deal with them becous of the cuality and profetionalism.Service: Motor buildingService: Motor building
Irving Cruz Chavez
4 years ago
Took my engine here to get built. First off it wasn t cheap,which I don t mind if it s worth the work.i had to take my engine back at least 5 times for bad work. At first I didn t care because the guy that was building my engine was really nice. But the last time I took it back was because my block had a crack and was supposed to get welded. I took my oil pan off today to find out it wasn t touched. Silicone was put in the Inside as a quick fix. Not only that but the pan was covered in shavings they didn t even bother to clean it. Now I m scared to finish my build don t even think it will run with the work they did. To top it off it took them about a year to finish my engine. They kept putting me to the side. They took my money but never did the job right. I hope to hear back so you guys can stand by your business and do it right.and yes I have all the paperwork for the build.
JR
3 years ago
Very reputable business with knowledgeable staffI took my engine for a complete rebuild with forge internals and other parts which I was providing after a long conversation with Jeff I discovered some of the parts I have would not meet my power goals. New parts was recommend by Jeff which I purchase. Some other shops would have just used the parts provided.I was give a turnaround which was a bit long but I don't mind wating for excellent work.Thanks Jeff@ CW Pence. I will definitely BE BACKService: Motor building
Hamza Ibrahim
5 years ago
I had come to this place a couple times for machine work and I came to get a couple heads cleaned and resurfaced and they did them in less than 24hrs. I highly recommend them for any machine work. The person that is always at the front counter knows his stuff and has many years of experience. I would rate it higher than a 5 if I could but best customer service I have ever experienced by a machine shop
manuel linares
3 years ago
I'm using them for my current build and so far it's been a great experience. I'm having them hot tank and measure clearances. If you know what you're getting into I cant see how you'll have problems. Don't get knockoff junk parts then blame these guys. I'll update with pics once it's done. I'm using all OEM parts except ARP bolts/studs and upgraded coated bearings.Service: Motor building
Eric Allen
5 years ago
Dropped of an item for a simple weld job he didn't give eta of when it would be done. Called to ask about it gave attitude and said ill get to it when i get to it. Worst machine shop in town. Would have like to do business with them since i was referred to them by another shop.
Francis Lopez
a year ago
They have really good customer service. If you need advice or recommendations, they are willing to help. I will recommend their services.
Chad Stanich
2 years ago
I have been using Pence Rebuilders for 17 years. Excellent work and honest people. I won't take my machine work anywhere else.
Carlos Carb�
8 years ago
Great people, they make you feel very welcome. Engine balance, bore, crankshaft keyway done, extremely great price. Thanks Billy and Jeffrey.
Elise Spahr
9 years ago
Very Knowledgeable staff & Very Friendly. I walked in to pick up my Subaru engine and walked out feeling like I had just made a friend. I think that is how every business should be.
Eric Schaefer
4 years ago
They are awesome! Jeff, Billy, the rest of the team helped me get my toy on the road. I will be back when I start doing mods to the car.
Carl Kindred
5 years ago
Being knowing these Brothers for quite awhile. Very outstanding and Knowledgeable. If you want stock to Freaking wild. Cw Pence Rebuilders is the place.
Justin Jackson
8 months ago
Very knowledgeable and great at their craft
Hector EL DURO Colon
4 years ago
THESE PEOPLE ARE VERY RUDE!!!!!!!! I WORK ON RACE ENGINES AND I SENT A CUSTOMER OF MINE TO TAKE A CYL. BLOCK AND IT SAT THERE FOR OVER A MONTH!!! THEY WOULD NOT ANSWER CALLS OR RETURN THE MESSAGES..FINALLY MY CUST. GOES THERE TO SEE THE PROGRESS AND WALA...THEY HAVE NOT EVEN TOUCH THE ENGINE!! THEN THEY GAVE MY CUST. GREAT ATTITUDE SO MY CUST. TOOK THE BLOCK. I SEND HIM TO A MACHINE SHOP IN LAKE ALFRED CALLED DEAN'S MACHINE SHOP!!! VERY HUMBLE PPL AND FAST WORK. I WOULD NEVER RECOMEND ANY WORK TO CW PENCE!!! EVER AGAIN PLACES LIKE THIS GO OUT OF BUSSINES BECAUSE THE SERVICE IS POOR AND DONT TREAT PAYING CUSTOMERS WITH RESPECT.
Jeff Howard
11 months ago
Awesome guys, they do great work
Anthony Thomas
3 years ago
I love the staff here, they are helpful, and do great work. They are the only machine shop I use.
S13redtop
7 years ago
Very nice guys. Done lots of machine work for me without a problem. Even on 800hp engines.
Joshua Servi
5 years ago
Best machine shop in town! Helpful, knowledgeable staff and top notch work!
Chris Coleman
3 years ago
Great quality machine work at reasonable points.Very satisfied!
johnathan rivera
8 years ago
very Knowledgeable staff. if you have any questions they'll talk you through it. if you need any advice just ask and they answer.
Paul Peters
a year ago
If you like gapping fools on the track, hit up CW Pence Rebuilders
Adrian Lowes
8 years ago
Great people to do business with. My shops first call for machine work
La Soltera
3 years ago
The best machine shop in FL....family oriented and trustworthy
Chris Clements
5 years ago
Very professional people and do a great job