Accessibility
- Wheelchair accessible parking lot
Payments
- Debit cards
Reviews
Reviews are sorted by relevance, with the most helpful and insightful feedback listed first for easy reference.
Sean Freidhof
10 months ago
Took my cylinder head from my 2.7L Tacoma here after I blew the head gasket. Theses guys walked me through everything they would do as far as testing, valve reseating, milling, etc. They even ordered me a new head gasket while I was there for much cheaper than I could get at autozone. They finished it in 3 days and I was able to get back to my project. Relatively cheap too! Now my truck runs better than ever and I have piece of mind that professionals looked it over and milled it perfectly. Some of these comments say about the metal shavings, but what do you expect from milling a large block of aluminum? Blow it all out or ask them to do it again they blew mine out again while I was there. Do yourself a favor and take your project here and you ll be glad you did.Service: Motor building
MaxAnthony Hashem
a year ago
Resurfaced the cylinder head of my vehicle. Went to install the head, and it was FILLED with metal shavings. I called to ask why and explain that the was upset, and he promptly hung up the phone on me. DO NOT use this business. I do not recommend. Overpriced and lack of customer service. Took way too long as well.... I am extremely dissappointed and upset about my experience here. Especially since I drove over 2.5 hours just to go to this shop specifically. (Update to job) They did not even give me back my lifters that you need for the engine to run. I'd like to say I could understand not installing them, but I can't, because it takes literal minutes to reinstall them. Since they did not give me them back and I didn't think, "Oh let me double check the work that I just spent several hundred dollars on", I reassembled my engine, unknowingly without lifters, causing me to believe I had bent valves or some other catastrophic issue. I had to then take it to a mechanic shop and it cost me thousands of dollars to correct. Unnecessarily spent money. Extremely unpleased with this business. Total joke, and they don't care either.Service: Engine repair
Nick O'Lone
5 years ago
I was rebuilding the top end in an ATV, and I contacted them for boring the cylinder and machining the head. Quoted a price upfront, and did everything they said they would. I had to get new valves and when they came in on a Monday I asked how quick they could turn the head around, already having the cylinder done, as we were hoping to go out of town the following weekend. He said he would see what he could do, and called the next morning advising it was done. I couldn t have been more appreciative to a 1day turnaround on the head, or the service and tips shared through the process.
Kevin Cole
6 years ago
Horrible work, and customer service. When prompted to incorrectly balance (External balance on an internal Ford Modular motor) I was told "It's your s***, I'll do it how you want" and that was when I took my build elsewhere. That was only the beginning however. I brought in one of my "Teksid" 4.6 aluminum blocks to be cleaned, inspected, and built. To my surprise, I was told all bores were good to go at standard size, 3.552". I sort of second guessed this in my mind, but assumed he is the professional and knows what he is doing. I sunk $1,315 into custom optioned out JE pistons in 3.552" bore size, stock bore. Took the build elsewhere, and found that from front to rear, the engine had normal wear ranging from .002" to .005" at the rear. The pistons are useless. I'm out the $204 to have Bob clean & inspect the block, and tell me to order the wrong size pistons. Then, $1,315 into the wrong pistons. Follow that up with $40 more to have the block measured an additional time. He nearly has me into the thousands of loss, and I'm going to consider legal action.
Doug Taylor
a year ago
Been a family business since day one. Have bought a dozen or more parts and engines here since they left Baltimore. The only good shop in Sussex
Gloria Robertson
a year ago
Great place to get your engine rebuilt. The gentleman that owns this business knows his business and good at what he does.
Zachary Clagg
6 years ago
Needed some work done and I walk in when they were closed and I said sorry don't know if you can give me quick estimate on an Atv head and he didn't want anything to do with it and just keep saying they are closed and told me no don't deal with them
mike yuhas
4 years ago
Had my block cleaned and pistons set great turnaround time
Bub Barkey
5 years ago
yuck 5
Aaron Harmon
3 years ago
The best around...