Accessibility
- Wheelchair accessible entrance
Reviews
Reviews are sorted by relevance, with the most helpful and insightful feedback listed first for easy reference.
Meero Panossian
a month ago
Robert over at Engine Line is super nice guy. He s helped us out a ton in the last couple of years. I highly recommend using their shop. They re definitely our go to shop.
Studio Foam
2 months ago
I WOULD NOT RECOMMEND:�Engine line machine shopI contacted "Engine line machine shop," I asked them, I'm looking for someone to rebuild engines, paid $6,000 total. Two months to complete the job, after I got the automobile back within the first 2 months "the engine seized up" before it seized up there were signs of problems. The engine will completely shut off while driving, I called in and talked to the tech, they said, they didn't know what the problem was. Then two weeks later, the engine seized up when I was 150 Miles away from home. The car was under warranty, so they rebuilt the engine again for free. After I got the car back within 2 months. The fan clutch gave out, I did not take the car back to "E.L.M.S," by this at time I was unhappy with the quality of workmanship on my car. The new car repairs cost me $1,000. NOTE: I purchased a new battery from E.L.M.S, which I believe they recharge my old battery and told me that was a new battery charge me $250. I asked them about the new battery, and they said that was a new battery, I said, but it's having the same problems with this new battery as the old battery before (not holding a charge) NOTE: so I just went and bought a new battery at Auto-Zone problem solved $250 so they didn't give me a new battery.So this is what they're actually doing at Engine line machine shop, is! They did not give me back a rebuilt engine. What they did is, they give me back a (((rebuilt engine block only))), they took ((all my old Parts)) off of my old engine and put them back on the new rebuilt engine block. That's why the car was cutting out on the freeway, seized up. fan clutch gave out.that's because they reused all the old original car parts and now they are failing.When you ask somebody to rebuild your engine you expect to getSpark plugsPiston ringsFan Belts. ...Alternator Belts. ...Serpentine Belts.Main and rod bearingsHead gasketHead bolts (Depending upon type and year)Timing belt and tensioner and guidesWater pumpValve guides and sealsSealsGasketsFiltersSerpentine belt and tensioner or V-beltsDistributor cap, rotor, and points and condenser (If Vintage)Plug wires (If Vintage)Oil pumpTiming chain and tensioner and guidesCamshaft bearingsInjectors and harnessIgnition coilCoil packs and harnessValvesValve springsDistributorOversize pistons (If block is rebored)Cam followersRebuild carburetor(s)Cam phasersFuel pumpCamshaft(s)StarterClutchClutch throw out bearingForged aluminum pistonsBillet rodsHigh volume oil pumpRoller timing chainBaffles and windage tray in the oil panI hope this help you out from making the same mistake i did.
Jayb 1961
4 months ago
Said they'd call me back with a quote but never did. I went to Palmdale Auto Experts instead. Needed major engine repair. Sorry guys. You missed out.
T W
3 years ago
The day before yesterday. I had an exhaust manifold stud break on me. A friend tried to help drill and get it out but was unsuccessful.. I went to Westerns Edge Auto Centerin Palmdale. They recommended ENGINE LINE MACHINE SHOPin Palmdale because they specialize in that kind of work. Well, it's TRUE!! Jr was cool and respectful. Talked to Robert. He said Can do it tomorrow at 2pm. I had the car towed to the shop. Robert took the broken stud out an replaced it with another one. They even put the paper on the floor like other professional shops. I would HIGHLY Recommend ENGINE LINE MACHINE SHOP. I am very satisfied with the work, with the staff and with the overall company. My car is up and running again. Thanks Robert and Engine Line Machine Shop
Dee Money
8 months ago
I recently had some work done by engine line that completely ruined my p8r b20b head simple job that engine line turned into garbage my car is ruined they refunded me the price of the work and refused to take responsibility for ruining it after telling them not paint the head they did told them all I needed was valve seals and robert insisted I needed new valves and he didn't know this and that ruined the seals 2x huge hazard as oil goes into my exhaust ports and into my exhaust and can cause the car to catch on fire HE BLATANTLY REFUSED TO GIVE ME MONEY TO HAVE MY CAR FIXED after multiple conversations I had with him before he thought he could fix it told me yeah I'll cash you out don't worry in the long run I got screwed out of a perfectly good running car he only returned the initial money I paid for the 3 angle valve job that he ruined and I did not need but he insisted I did and painted the head DO NOT TRUST ROBERT OR ANYTHING HE SAYS HE WILL SAY WHATEVER HE CAN TO SAVE HIS OWN HIDE unprofessional deceiving and untrustworthy not a man of his word save yourself the headache and take it somewhere else I will be contacting the BBB about the situation and the business practices here on top of that I have run into multiple people that have had the same issueterrible place with mediocre work at bestService: Engine repair
Tony Fernandez
a year ago
5 stars, no heaven, my experience was not good from far, nor far from good.While the place depicts the name of engineering, it has nothing to with it.. you are told one thing , such as """ yes we have it""" and then once you arrive you arevtold that you're gonna have to place an order.. don't expect to get sane day service, hardly anyone keeps stock or much less ske dy service. They should change their name toCURVED LINE NOT ENGINEEREDIt would suit them much better.
Don
2 years ago
Awesome people... they are clean and the work is tip top! Can't complain and the DMV in house thing is very convenient in a lot of ways! Keep up the good work.
Maureen Eliasen
5 years ago
Just got truck back after complete engine rehaul. Great results and highly recommend!
Ed
4 years ago
I took in a old school 1973 350 block and heads. We specifically said if they can please check the block before anything. Heads were done and after a MONTH I receive a call that the block was no good. They offered a replacement block that we didn't feel was a good donor cause it had a small hole in one of the cylinders. To top it off it had a repair job on a mountiong bolt. Well now I'm stuck with bebuilt heads and a complete kit that all cost me over 700 plus bucks. I left with a promise that he would look for another block that we can use it's been another month and still nothing. I guess they rather make that 1 time $$$ than make a long term customer investment. Never going back to engine line just driving down below or LA where shops can keep it real and no BS. Just felt I needed to share my experience with this place as it failed my expectation of a machine shop business.
Ryan Henry
2 years ago
Good work but not as punctual as they can be. Advice to them is add a day to the time of completion of job and they would be much better on time of completion. Business 101
Luis Angulo
6 years ago
This people give very good quality service. Auto machine shop offers short and long blocks crankshaft grinding cylinder head valve job block boring and honing and Complete Master Kits..Auto parts for very Reliable price. Ask for Robert he's the main guy
ED FAVELA
3 years ago
Very friendly and helpful customer service hopefully they can take care of my issue So they took care of my issue with my intake manifold I was very pleased with the final product! Robert went above and beyond.
Cisco O
9 years ago
I had my H22A rebuilt there. They did a amazing job,had bronze guides installed, and ti- valve/retainter spring kit as well. New seal. rings, everything got reworked/rebuilt and checked. Unfortunately, they dont have the equipment to do some valve seleves for our blocks, darton sleeve got referred to La Sleeves to get done. But overall at 20k miles and its running great no issues.
Hovsep Mahdessian
a year ago
Robert the owner is a great guy, knows his job and is professional also he is friend with all his customers, great lace to have a business with
Angel Figueroa
2 years ago
Robbert is an amazing person to work with. Been here plenty of times and every time its flawless.
Jeffrey Olesh
4 years ago
Excellent service, and knowledgeable staff, combine with top of the line equipment to make this the best automotive machine shop in the AV.
irving delgado
2 years ago
I get all machine work done here, very recommended great work done by it's owner Robert and his colleges
mario lilore
3 years ago
Great place and prices. They have done two engines for me. Roberto is the man!
Jens Pinup
3 years ago
Very friendly! Reasonable pricesSandra always had all of our paper work ready for us!.Service: Engine repairService: Engine repair
jose alvarez
4 years ago
Excellent customer service, great job on resurfacing my cylinder head.
Heyhey Martinez
3 years ago
One of the best places to get you're motor done just talk to robert honest man
jess rizziello
7 years ago
Great work excellent customer service they get the job done right
Jesus Giron
3 years ago
Worst place to go they charged me for broken heads and I payed for them to check if it had cracks 120 $$$$$$!!!!Service: Engine repairService: Engine repair
A.A.mobile truck repair and welding
a year ago
They seemed like they new. What they were doing. attude
Michelle Turner
4 years ago
Everyone is really friendly and helpful.
David Goodman (Davino)
4 years ago
Good food
Cesar Borunda
5 years ago
Good service good job
ojoXojo dienteXdiente
a year ago
Great service
Karla Y
5 years ago
I was very pleased.
Gary Hidalgo
5 years ago
Outstanding shop.