Accessibility
- Wheelchair accessible entrance
Reviews
Reviews are sorted by relevance, with the most helpful and insightful feedback listed first for easy reference.
Randy Wright
7 months ago
Absolutely amazing service! This is the 2nd time I ve used them and the customer service is exceptional. They are very professional and timely, as well as friendly. The heads I got back look fantastic.
buster b
4 months ago
Cathy was great on the phone when I explained what I needed, and said come right over. I had a lower control arm from a 66 Satellite that needed the pivot pin and bushing pressed out and new ones installed. The last guy boogered up the threads on the shaft and I made them worse trying to clean them up.Steve came out of the back, looked it over, and said no problem. He did the work the same day, and Cathy called and said come and get it. The charge was more than reasonable.There's an old saying that says you can have it fast, cheap or good, pick two. The shop did all three! I will be back!
Bryce Garst
3 months ago
Honest pricing on a bushing and ball joint replacement. Turn around was also very fast. Would recommend to anyone that needs some press work!
Bret Woodard
a year ago
Quick turnaround for my bushings. Quality work. Would recommend for bushing pulling or pressing. Can't speak on other services, but seemed very efficient and professional
Hi Arizonabruce
a year ago
Great little family business. They do excellent work and quick turnaround and good price. What a gem of a place.
Garry Kennedy
2 years ago
I've been using these guys for over 20 years and never had a bad experience. Excellent work and good turnaround times. Very good pricing also.
Nima Gems
2 years ago
As soon as I walked in they stopped and started helping me. The shop was friendly, took time to educate me on the process and the turn around time was about a week. Great proces, knowledgable staff and owner win win!Service: Motor buildingService: Motor building
Bill Howard
a year ago
Had an air drier that I could not get a fitting off. They took the fitting off the same day for a reasonable charge. I would go back if I needed anything more.
Stephanie Lindeman
5 years ago
I called on a Saturday morning in desperate need of having my wheel bearings disassembled & the new ones pressed. The shop did the work quickly at a fair price. I would recommend them & will use them in the future for any machine shop needs I may have. Thanks again.
Jakob Hansen
8 years ago
I took my head here due to positive reviews I read online. The place seemed kind of sketchy, but it appeared to be popular. The price was great, although it took longer than they originally said. However, I got it back and the camshaft position sensor, which I had left on it, was broken. Also, the valve clearance was way too big, so I had to spend time and money fixing both of those things. If you do take your head here, make sure anything electronic is off of it and be prepared to redo your valve clearance.
Taylor Graham
4 years ago
Did an awesome job great staff and kind!! Everything came out brand new and went back together perfectly... definitely referring them to friends and family. Price was great..
Frederick Maxwell
a year ago
The best place in town for automotive machine work I've been using them for over 15 years and they have never done me wrong and always have been the most reasonably priced.
heather macy
11 years ago
Thanks to Johnny Rackleys I was able to get my sons head rebuilt for a very reasonable price. They answered all my questions and were very helpful. This is a family owned shop, I had to call back with questions moths after the work was completed and they remembered me. Service was quick, accurate and professional. As a manager of an auto shop.....I greatly respect the staff at Johnnys. Thanks for all your help!!!!
Brenton Abel
3 years ago
I've been coming here for years and always have a good experience. The people are very friendly and the price for turning rotors is cheap. They are fast and dependable.
Tim Fleming
2 years ago
Best machine shop in the valley. I've had lots of work done there. Friendly staff, and owner. I wouldn't go anywhere else. Support local small business!!!
Ferris Odish
5 years ago
I ve been dealing with these folks for a few years now and not once I have not received the work that they ve done in excellence they deliver amazing jobs And their work ethics is wonderful their turnaround for the repairs that needs to be done as quick and easy very friendly and family oriented I highly recommend this job keep up the good work not a lot of people take pride of what they do we need more people like you amazing work thank you
Gary
a year ago
A true mom and pop shop you can trust. Great work and fair prices.
Calvin R
7 years ago
Brought Johnny Rackleys my 2008 Subaru Cylinder Heads to be done. Seemed like they did a good job until I had installed them back on the motor and found out I can't put on one of my valve covers because they had stripped out the threads to the screw holes. So can't mount my left side valve cover properly. Called them to let them know my frustration and he told me he didn't do it and doesn't know what I want him to do about it. For goodness sake you're a machine shop! You could've offer to drill and insert new threads, but no you cant own up to it and I have to do it anyway so I can have it done properly. No more business from me, and I have a lot of it to do. Don't use Johnny Rackleys!!!!!
Columboandsonsllc Columbo
2 years ago
I've used that many times over the past 20-30 years since I've been in Arizona he's always done a 100% job and I'd give him a 10 my name is Mike Colombo Colombo and sons and how do you send it
Danielle Menard
a year ago
Great, honest and quality work at this amazing family owned business!Service: Clutches & transmissions service & repairService: Clutches & transmissions service & repair
Cameron Stafford
a year ago
I've been going here for years! They always take care of my machine needs!!!
Tom J
7 years ago
The customer service was great all the people there are friendly and very helpful. Although they were able to help me with my problem they suggested someone that could and thank you very much .
JB BROWN
6 years ago
THEY DONT HAVE UPTO DATE MACHINES HAD TO HAVE HEADS REPLACED BECAUSE OF THERE STAFF WITH THE OUTLETS AND INLETS TO HEADS WERNT CLEANED OUT AFTER VALVES AND HEADS MILLED IF I WOULD HAVE PUT THEM ON AS DIRTY AS THEY WERE 300 DOWN DRAIN IT WAS DOWN THE DRAIN ALREADY THEY WENT PAST THE MARKS ON HEADS COST BETTER BUSINESS COMPLAINT AND NOT RESOLVED THEY AVOIDED ALL ISSSUES COME DOWN TO THERE MACHINES ARNT UP TO DATE.EITHER ARE THEY VERY UNORGANIZED ....
Manny L
4 years ago
Took my flywheel to get resurfaced and they did a good job. Looks like they do all types of machining which is great when I rebuild my engine.
Tru Thirst
6 years ago
Perfect, I got exactly what I was looking for. Great service, friendly people and a great product. I will be returning here for my future machine shop services! Thanks guys!
Nick Alati
2 years ago
Wanna talk about an old school family brand quality Business, we're talking Johnny Rockets. Absolutely fantastic customer service
Terry Wallace
3 years ago
All I know is 210 was the cost for leaks, cracks, and a little welding, surfacing, and 1 valve done. With that said I'm ready to rebuild my motor.
Tyler Wright
6 years ago
Great service and quick turn around on some bushings pressed into my control arms. Would recommend them to anyone.
Romeo Youkhana
4 years ago
I dropped off my 96 Mazda Miata s Flywheel needed it resurfaced 2hrs later done. Thank you for the FAST turn time
Dominic Johnson
3 years ago
Very friendly with good prices and quality work. Would highly recommend